What we do

Mendiguren Olaeta, Joseba

Belongs to the group: Advanced Material Forming Processes

Contact

Nombre y apellidos: Joseba Mendiguren Olaeta
Nacionalidad: España
Tlf. de contacto: 943794700
Contactar

Formación

Doctorado

Mechanics and Materials, Experimental and numerical analysis of the elastic behaviour of the TRIP 700 steel for springback predictions, Mondragon Unibertsitatea, 2012

Licenciado, Ingeniero, Grado, Arquitecto

Industrial Engineering, Mondragon Unibertsitatea, 2011
Mechanical Engineering, Ecole Nationale Superieur d'Arts et Metiers ParisTech, 2008
Mechanical Engineering Degree, Mondragon Unibertsitatea, 2006

Máster

Mechanical Behaviour and Materials, Mondragon Unibertsitatea, 2010
Numerical Methods in Engineering Calculation and Design, Universitat Politécnica de Catalunya, 2012

Situación laboral

Entidad: Mondragon Unibertsitatea
Centro: Faculty of Engineering
Departamento: Mecánica y Producción Industrial
Área de conocimiento: Ingeniería mecánica
Modalidad de contrato: Plantilla
Categoría/Puesto: Lecturer/Researcher
Grupo de investigación: Advanced Material Forming Processes

Ponencias y congresos / conferencias

Numerical prediction of force and energy consumption in roll forming processes AIP Conference Proceedings. Vol. 2113. Nº 1. Proceeedings of the 22nd International ESAFORM Conference on Material forming (ESAFORM 2019). Editor, Lander Galdos et al. Published 2 July, Año: 2019 Autoría: Eneko Saenz de Argandoña, Joseba Mendiguren, Lander Galdos, Nagore Otegi, Javier Trinidad, Alain Armendariz
Numerical study on the effect of microstructure on the mechanical behaviour of dual-phase steels AIP Conference Proceedings. Vol. 2113. Nº 1. Proceeedings of the 22nd International ESAFORM Conference on Material forming (ESAFORM 2019). Editor, Lander Galdos et al. Published 2 July, Año: 2019 Autoría: Mangas, Á., Eguía, I., Ezkerra, J., Mendiguren, J., Arechabaleta, Z.
Perfilado 4.0: ayuda a la puesta a punto y aseguramiento de la calidad en procesos de perfilado 22 CMH Congreso de fabricación avanzada y máquinas-herramienta. Donostia, Año: 2019 Autoría: E. Sáenz de Argandoña, L. Galdos, J. Mendiguren, D. Reguera, I. Garitano, A. Armendariz
On the accurate characterization of the drawbead up-lift forces IOP Conference Series: Materials Science and Engineering. Vol. 418. Nº 1. Institute of Physics Publishing. 21 September, Año: 2018 Autoría: I. Gil, L. Galdos, N. Otegi, J. Mendiguren, E. Saenz de Argandoña
Hotzetako forjan erabilitako altzairuaren gogortzearen karakterizazioa konpresio eta tortsio saiakuntzak erabilita Materialen Zientzia eta Teknologia IV. Kongresuko lanen bilduma. Donostia, 2018ko Uztailak 2-3. Argitaratzaile nagusia: Amaia Iza-Mendia. Servicio de Publicaciones Universidad de Navarra, Año: 2018 Autoría: L. Galdos, N. Otegi, J. Mendiguren, E. Saénz de Argandoña, J. Agirre, B. Zubia
Cost Efficiency of the Non-Associative Flow Rule Simulation of an Industrial Component AIP Conference Proceedings. Vol. 1896. Nº 1. (Proceedings of the 20th International Conference on Material Forming (ESAFORM), Año: 2017 Autoría: Lander Galdos, Eneko Sáenz de Argandoña, Joseba Mendiguren
Hole expansion test of third generation steels AIP Conference Proceedings. Vol. 1896. Nº 1. Proceedings of the 20th International ESAFORM Conference on Material Forming (ESAFORM). Dublin. 26-28 April. Edited by Dermot Brabazon, Sumsun Naher, and Inam Ul Ahad. AIP Publishing, Año: 2017 Autoría: Julen Agirre, Joseba Mendiguren, Lander Galdos, Eneko Sáenz de Argandoña
Press hardening of alternative high strength aluminium and ultra-high strength steels AIP Conference Proceedings. Vol. 1769. 050006, Año: 2016 Autoría: Joseba Mendiguren, Rafael Ortubay, Xabier Agirretxe, Lander Galdos and Eneko Saenz de Argandoña
Investigation of Influencing Factors on Friction during Ring Test in Hot Forging Using FEM Simulation AIP Conference Proceedings. Vol. 1769.130009, Año: 2016 Autoría: R. Sethy, L.Galdos, J.Mendiguren, E.S. de Argandona
Influence Of Material´s Hardening Behaviour of DP1000 on Numerical Springback Prediction AIP Conference Proceedings. Vol. 1769.200014, Año: 2016 Autoría: Imanol Gil, Elena Silvestre, Lander Galdos, Joseba Mendiguren, Eneko Saenz de Argandoña, Eric Hug
Influence of the tool temperature increment on the coefficient of friction behavior on the deep drawing process of HSS Annual Conference of the International Deep Drawing Research Group (IDDRG 2016): Challenges in Forming High-Strength Sheets. Proceedings of a meeting held 12-15 June 2016, Linz, Austria. IOP Conference Series: Materials Science and Engineering Vol. 159. Pp. 172-177. Institute of Physics Publishing (IOP), Año: 2016 Autoría: I. Gil, L. Galdos, E. Mugarra, J. Mendiguren, E. Sáenz de Argandoña
Hot stamping of AA7075 aluminum sheets Annual Conference of the International Deep Drawing Research Group (IDDRG 2016): Challenges in Forming High-Strength Sheets. Proceedings of a meeting held 12-15 June 2016, Linz, Austria. IOP Conference Series: Materials Science and Engineering Vol. 159. Pp. 240-244. Institute of Physics Publishing (IOP), Año: 2016 Autoría: J. Mendiguren, E. Saenz de Argandoña, L. Galdos
Influence of heat treatments on springback and formability of Inconel 718 alloy in multistage deep drawing processes at room temperature International Deep Drawing Research Group (IDDRG) "Challenges in Forming high-strength sheets". 13-15 June, Año: 2016 Autoría: U. Ulibarri, I. Gil, J. Mendiguren, L. Galdos, E. Sáenz de Argandoña
Roll levelling semi-analytical model for process optimization Journal of Physics: Conference Series. Vol. 734. N. artículo 032034, Año: 2016 Autoría: E. Silvestre, D. Garcia, L. Galdos, E. Saenz de Argandoña and J. Mendiguren
Comparison between different measuring methods to determine the Young's modulus of Inconel 718 9th Forming Technology Forum. Advanced Methods in Material Testing for Sheet Metal Forming. Ohlstadt/Garmisch-Partenkirchen. 12–13 September, Año: 2016 Autoría: U. Ulibarri, E. Saenz de Argandoña, J. Mendiguren, L. Galdos, I. Gil
Friction behaviour analysis of UHSS using different tool temperatures and contact pressures 9th Forming Technology Forum. Advanced Methods in Material Testing for Sheet Metal Forming. Ohlstadt/Garmisch-Partenkirchen. 12–13 September, Año: 2016 Autoría: Imanol Gil, Endika Mugarra, Lander Galdos, Joseba Mendiguren, Eneko Sáenz de Argandoña
Friction Characterization in Levelling Processes Advances in Materials & Processing Technologies (AMPT). Madrid. 14-17 December, Año: 2015 Autoría: U. Ulibarri Hernández, J. Mendiguren, E. Sáenz de Argandoña, I. Gil Acedo, L. Galdos
Influence of material´s hardening behaviour of DP1000 on numerical springback prediction Advances in Materials & Processing Technologies (AMPT). Madrid. 14-17 December, Año: 2015 Autoría: I. Gil, U. Ulibarri Hernández, E. Sáenz de Argandoña, J. Mendiguren, L. Galdos
Friction and Heat Transfer Coefficient Determination of Titanium Alloys during Hot Forging Conditions Advances in Materials and Processing Technologies Conference (AMPT). 14-17 Diciembre, Año: 2015 Autoría: R. Sethy, L. Galdos, E. Sáenz de Argandoña, J. Mendiguren
Improvement in Hot Stamping Efficiency Through Tooling Optimization Hot Sheet Metal Forming of High-Performance Steel CHS2. Proceedings of the 5th International Conference on Hot Sheet Metal forming of High-Performance Steel. Pp. 639-647. Collection: CHS2-Series. Nº. 5, Año: 2015 Autoría: X. Aguirretxe, J. Martín, M. Carranza, L. Galdos, J. Mendiguren, D. Casellas, R. Hernandez, M. Riera
Influencia de la implementación de un coeficiente de fricción variable en el proceso de embutición Proceedings of the CMN 2015. Congress on Numerical Methods in Engineering. Lisbon. 29 June- 2 July, Año: 2015 Autoría: I. Gil, J. Mendiguren, L. Galdos, E. Sáenz de Argandoña
Caracterización del coeficiente de fricción a presiones de pisado variable y su aplicación en modelos de simulación numérica XIV Congreso Nacional de Materiales. Gijón. 8-10 junio, Año: 2016 Autoría: Endika Mugarra, Eneko Sáenz de Argandoña, Lander Galdos, Joseba Mendiguren, Imanol Gil
Caracterización del coeficiente de fricción en procesos de aplanado XIV Congreso Nacional de Materiales. Gijón. 8-10 junio, Año: 2016 Autoría: Unai Ulibarri, Eneko Sáenz de Argandoña, Lander Galdos, Joseba Mendiguren, Elena Silvestre, Imanol Gil
Definición del endurecimiento por acritud de los aceros de alta resistencia mediante técnicas de digital image correlation XIV Congreso Nacional de Materiales. Gijón. 8-10 junio, Año: 2016 Autoría: Julen Agirre, Eneko Sáenz de Argandoña, Lander Galdos, Joseba Mendiguren, Imanol Gil
Effect of Influencing Factors on Friction modelling during hot forging by means of ring-compression test using FEM of AISI304L XIV Congreso Nacional de Materiales. Gijón. 8-10 junio, Año: 2016 Autoría: Ritanjali Sethy, Eneko Sáenz de Argandoña, Lander Galdos, Joseba Mendiguren, Imanol Gil
Estampación en caliente de aceros al boro mediante el empleo de aceros de herramientas especiales XIV Congreso Nacional de Materiales. Gijón. 8-10 junio, Año: 2016 Autoría: Lander Galdos, Joseba Mendiguren, Eneko Sáenz de Argandoña, Jon Ander Lopez de Murillas
Influencia del endurecimiento del material en la predicción de la recuperación elástica de un DP1000 XIV Congreso Nacional de Materiales. Gijón. 8-10 junio, Año: 2016 Autoría: Imanol Gil, Eneko Sáenz de Argandoña, Joseba Mendiguren, Lander Galdos
Optimización de procesos de aplanado de aceros de alta resistencia XIV Congreso Nacional de Materiales. Gijón. 8-10 junio, Año: 2016 Autoría: Eneko Sáenz de Argandoña, Lander Galdos, Joseba Mendiguren, Elena Silvestre

Actividad profesional anterior

Acreditaciones

UNIBASQ: Private University Lecturer certificate

DEAKIN University Fecha inicio: 03/04/2013 \| Fecha fin: 03/07/2014
Paris Tech Arts et Metiers Fecha inicio: 10/01/2007 \| Fecha fin: 07/20/2008

Idiomas

French (C1)
English (C2)

FORMACIÓN

DOCTORADO

MECÁNICA Y MATERIALES , Experimental and numerical analysis of the elastic behaviour of the TRIP 700 steel for springback predictions , MONDRAGON UNIBERTSITATEA , 2012

LICENCIATURA, INGENIERIA, GRADO, ARQUITECTURA

INGENIERÍA TÉCNICA ESPECIALIDAD MECÁNICA , MONDRAGON UNIBERTSITATEA , 2006
INGENIERIA INDUSTRIAL , MONDRAGON UNIBERTSITATEA , 2011
INGENIERIA INDUSTRIAL , Ecole Nationale Superieur d'Arts et Metiers ParisTech , 2008
MÉTODOS NUMÉRICOS EN INGENIERÍA , UNIVERSITAT POLITÉCNICA DE CATALUNYA , 2012
MECÁNICA Y COMPORTAMIENTO DE MATERIALES , MONDRAGON UNIBERTSITATEA , 2010

SITUACIÓN LABORAL

Entidad: Mondragon Unibertsitatea
Centro: Escuela Politécnica Superior
Departamento: Mecánica y Producción Industrial
Área de conocimiento: Ingeniería mecánica
Modalidad de contrato: Contratado
Categoría / Puesto: Profesor / Investigador

ACTIVIDAD DOCENTE

Asignaturas impartidas

PROCESOS DE FABRICACIÓN Curso: 2016/2017 \| Cred.: 6.0 \| Título: GRADO EN INGENIERÍA EN ORGANIZACIÓN INDUSTRIAL
PROCESOS DE FABRICACIÓN II Curso: 2016/2017 \| Cred.: 4.5 \| Título: GRADO EN INGENIERÍA EN DISEÑO INDUSTRIAL Y DESARROLLO DE PRODUCTO
CONFORMADO DE MATERIALES Curso: 2016/2017 \| Cred.: 5.5 \| Título: MÁSTER UNIVERSITARIO EN INGENIERÍA INDUSTRIAL
TÉCNICAS Y HERRAMIENTAS DE MEJORA Curso: 2016/2017 \| Cred.: 3.0 \| Título: GRADO EN INGENIERÍA EN ORGANIZACIÓN INDUSTRIAL
PROCESOS DE FABRICACIÓN I Curso: 2015/2016 \| Cred.: 4.5 \| Título: GRADO EN INGENIERIA EN DISEÑO INDUSTRIAL Y DESARROLLO DE PRODUCTO
TALLER DE DISEÑO III Curso: 2015/2016 \| Cred.: 3.0 \| Título: GRADO EN INGENIERIA EN DISEÑO INDUSTRIAL Y DESARROLLO DE PRODUCTO
PROCESOS DE FABRICACIÓN Curso: 2015/2016 \| Cred.: 6.0 \| Título: GRADO EN INGENIERÍA EN ORGANIZACIÓN INDUSTRIAL
MODELIZACIÓN NUMÉRICA PARA LA FABRICACIÓN Curso: 2015/2016 \| Cred.: 4.5 \| Título: GRADO EN INGENIERÍA MECÁNICA
CONFORMADO DE MATERIALES Curso: 2015/2016 \| Cred.: 5.5 \| Título: MÁSTER UNIVERSITARIO EN INGENIERÍA INDUSTRIAL.
PROCESOS DE FABRICACIÓN Curso: 2014/2015 \| Cred.: 6.0 \| Título: GRADO EN INGENIERÍA EN ORGANIZACIÓN INDUSTRIAL
CONFORMADO DE MATERIALES Curso: 2014/2015 \| Cred.: 5.5 \| Título: MÁSTER UNIVERSITARIO EN INGENIERÍA INDUSTRIAL.

ACTIVIDAD PROFESIONAL ANTERIOR

DEAKIN UNIVERSITY Fecha inicio: 04/03/2013 \| Fecha fin: 07/03/2014
PARIS TECH ARTS ET METIERS Fecha inicio: 01/10/2007 \| Fecha fin: 20/07/2008

AA5754 aluminium alloy springback reduction by post forming electro plastic effect (PFEPE) ARTICULO \| Mechanics of Materials. Vol. 198. N. art. 105136. November, Year: 2024 \| ISBN/ISSN: 1872-7743 Author: LOZARES ABASOLO, JOKIN MENDIGUREN OLAETA, JOSEBA JIMBERT LATXA, PELLO AIZPURU LARRAÑAGA, IOSU BARRENETXEA IÑARRA, MANEX TRINIDAD NARANJO, JAVIER OTEGI MARTINEZ, NAGORE
Sensitivity Analysis of Near Solidus Forming (NSF) Process with Digital Twin Using Taguchi Approach ARTICULO \| Advances in Manufacturing, Year: 2024 \| ISBN/ISSN: 2195-3597 Author: SAJJAD, MUHAMMAD TRINIDAD NARANJO, JAVIER PLATA REDONDO, GORKA LOZARES ABASOLO, JOKIN MENDIGUREN OLAETA, JOSEBA
Characterization of Friction Coefficient at Near Solidus Forming (NSF) Conditions using T-shape Compression Test ARTICULO \| Journal of Manufacturing Processes. Vol. 124. Pp. 1259-1272. August, Year: 2024 \| ISBN/ISSN: 2212-4616 Author: SAJJAD, MUHAMMAD AGIRRE BIKUÑA, JULEN PLATA REDONDO, GORKA LOZARES, JOKIN MENDIGUREN OLAETA, JOSEBA
Necking detection in stretch-bent materials exhibiting the Portevin-Le Chatelier effect COMUNICACION_CONGRESO \| Materials Research Proceedings. Vol. 41. Pp. 1569-1578, Year: 2024 Author: MARTÍNEZ-DONAIRE, ANDRÉS J. MENDIGUREN OLAETA, JOSEBA PALOMO, DAVID VALLELLANO, CARPÓFORO SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Digital twin development for the sensitivity analysis of near solidus forming process COMUNICACION_CONGRESO \| Materials Research Proceedings. Vol. 28. Pp. 1521-1530, Year: 2023 \| ISBN/ISSN: 2474-3941 Author: SAJJAD, MUHAMMAD MENDIGUREN OLAETA, JOSEBA PLATA REDONDO, GORKA LOZARES ABASOLO, JOKIN
Anisotropic plasticity and fracture modelling of cold rolled AA5754 ARTICULO \| Engineering Fracture Mechanics. Vol. 289. Article 109471. September, Year: 2023 \| ISBN/ISSN: 0013-7944 Author: ERICE ECHAVARRI, BORJA MENDIGUREN OLAETA, JOSEBA ROLFE, BERNARD
Crystal Plasticity Modeling of Al Alloy under Linear and Non-Linear Loading ARTICULO \| Key Engineering Materials. Vol. 926. Pp. 2099-2108. July, Year: 2022 \| ISBN/ISSN: 1662-9795 Author: JUAN, RONGFEI GASTAÑARES INZA, XABIER LIU, WENQI MENDIGUREN OLAETA, JOSEBA LIAN, JUNHE DOMINGUEZ URETA, XABIER
In-situ analysis of the elastic-plastic characteristics of high strength dual-phase steel ARTICULO \| Materials Science and Engineering: A. Article 144097. Available online 30 September, Year: 2022 \| ISBN/ISSN: 09215093 Print Author: VITZTHUM, SIMON REBELO KORNMEIER, JOANA MENDIGUREN OLAETA, JOSEBA MAAWAD, EMAD NORZ, ROMAN GRUBER, MAXIMILIAN HOFMANN, MICHAEL VOLK, WOLFRAM
Numerical study of advanced friction modelling for sheet metal forming: influence of the die local roughness ARTICULO \| Tribology International. Vol. 165. N. artículo 107259. January, Year: 2022 \| ISBN/ISSN: 0301-679X Author: ZABALA EGUREN, ALAITZ CAÑIZARES, DANIEL MENDIGUREN OLAETA, JOSEBA LLAVORI OSA, IÑIGO SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO OTEGI MARTINEZ, NAGORE
Post-forming, electro-plastic effect internal stress reduction in AA5754 aluminium alloy ARTICULO \| Materials Science and Engineering A. Vol. 852. Article 143686. September, Year: 2022 \| ISBN/ISSN: 0921-5093 Author: LIU, WENQI AIZPURU LARRAÑAGA, IOSU OTEGI MARTINEZ, NAGORE MENDIGUREN OLAETA, JOSEBA ORALLO GIL, ANA BARRENETXEA IÑARRA, MANEX LIAN, JUNHE
Plasticity evolution of an aluminum-magnesium alloy under abrupt strain path changes ARTICULO \| International Journal of Material Forming. Vol. 15. Artículo 40. April, Year: 2022 \| ISBN/ISSN: 1960-6214 online Author: LIAN, JUNHE RONGFEI, JUAN LIU, WENQI GASTAÑARES INZA, XABIER MENDIGUREN OLAETA, JOSEBA
The Interaction between the Sheet/Tool Surface Texture and the Friction/Galling Behaviour on Aluminium Deep Drawing Operations ARTICULO \| Metals. Vol. 11. N. 6. N. artículo 979, Year: 2021 \| ISBN/ISSN: 2075-4701 Author: ZABALA EGUREN, ALAITZ MENDIGUREN OLAETA, JOSEBA CHILDS, CHRIS AGINAGALDE LOPEZ, ANDREA LLAVORI OSA, IÑIGO GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Initiation of dynamic recrystallization of as-cast N08028 alloy COMUNICACION_CONGRESO \| ESAFORM Proceedings. N. artículo, 896 Year: 2021 \| ISBN/ISSN: 978-2-87019-303-7 online Author: MORA SERRANO, ELENA HURTADO HURTADO, JOSE IGNACIO NAVARRO, AITOR SILVEIRA, ELENA POLETTI, CECILIA MENDIGUREN OLAETA, JOSEBA
Simulation of Cold Forging Processes Using a Mixed Isotropic-Kinematik Hardening Model COMUNICACION_CONGRESO \| Daehn G., Cao J., Kinsey B., Tekkaya E., Vivek A., Yoshida Y. (eds). Forming the Future. The Minerals, Metals & Materials Series. Pp. 773-787. Springer, Year: 2021 \| ISBN/ISSN: 978-3-030-75381-8 online Author: GALDOS ERRASTI, LANDER AGIRRE BIKUÑA, JULEN SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MENDIGUREN OLAETA, JOSEBA OTEGI MARTINEZ, NAGORE
A coupled 3D wear and fatigue numerical procedure: Application to fretting problems in ultra-high strength steel wires ARTICULO \| International Journal of Fatigue. Vol. 143. N. artículo 106012, Year: 2021 \| ISBN/ISSN: 0142-1123 Author: LLAVORI OSA, IÑIGO GOMEZ RODRIGUEZ, XABIER MENDIGUREN OLAETA, JOSEBA ZABALA EGUREN, ALAITZ
New drawbead tester and numerical analysis of drawbeads closure force ARTICULO \| International Journal of Advanced Manufacturing Technology, Year: 2021 \| ISBN/ISSN: 0268-3768 Author: GIL ACEDO, IMANOL SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MUGARRA FERNÁNDEZ, ENDIKA GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA
Contact pressure, sliding velocity and viscosity dependent friction behavior of lubricants used in tube hydroforming processes COMUNICACION_CONGRESO \| 24th International ESAFORM Conference on Material Forming, ESAFORM 2021. N. artículo, 2081 Year: 2021 \| ISBN/ISSN: 978-287019302-0 Author: GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO OTEGI MARTINEZ, NAGORE TRINIDAD NARANJO, JAVIER
Contact pressure and sliding velocity ranges in sheet metal forming simulations COMUNICACION_CONGRESO \| ESAFORM 2021 - 24th International Conference on Material FormingOpen Access. N. artículo 426, Year: 2021 \| ISBN/ISSN: 978-287019302-0 Author: CILLAURREN ARRIAGA, JOSEBA ZABALA EGUREN, ALAITZ GALDOS ERRASTI, LANDER SÁNCHEZ PALOMAR, MARIO MENDIGUREN OLAETA, JOSEBA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
A review of the effects of cyclic contact loading on fretting fatigue behavior ARTICULO \| Advances in Mechanical Engineering. Vol. 12. N. 9. Pp. 1–17, Year: 2020 \| ISBN/ISSN: 1687-8140 online Author: ABBASI A, FARSHAD MAJZOOBI, G. H. MENDIGUREN OLAETA, JOSEBA
Experimental and Numerical Simulation Investigation on Deep Drawing Process of Inconel 718 with and without Intermediate Annealing Thermal Treatments ARTICULO \| Applied Sciences. Vol. 10. Nº 2. N. Artículo 581, Year: 2020 \| ISBN/ISSN: 20763417 Author: ULIBARRI HERNANDEZ, UNAI GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
The influence of the kinematic hardening on the FEM simulation of Tension Levelling Process ARTICULO \| Procedia Manufacturing. Vol. 47. Pp. 1381-1386, Year: 2020 \| ISBN/ISSN: 2351-9789 Author: GARCIA, AITOR OTEGI MARTINEZ, NAGORE TRINIDAD NARANJO, JAVIER GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA SILVESTRE SORIANO, ELENA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Aluminum springback reduction by post-forming electric pulses ARTICULO \| Procedia Manufacturing. Vol. 47. Pp. 1387-1391, Year: 2020 \| ISBN/ISSN: 2351-9789 Author: ORALLO GIL, ANA GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA TRINIDAD NARANJO, JAVIER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Strain rate effect on the fracture behavior of the AA5754 aluminum alloy ARTICULO \| Procedia Manufacturing. Vol. 47. Pp. 591-595, Year: 2020 \| ISBN/ISSN: 2351-9789 Author: BUENO UGARTE, MADDI GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MENDIGUREN OLAETA, JOSEBA LOU, YANSHAN ROLFE, BERNARD WEISS, MATTHIAS
The effect of material surface roughness in aluminum forming ARTICULO \| Procedia Manufacturing. Vol. 47. Pp. 591-595, Year: 2020 \| ISBN/ISSN: 2351-9789 Author: SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GALDOS ERRASTI, LANDER ZABALA EGUREN, ALAITZ MENDIGUREN OLAETA, JOSEBA
Towards the automation of the die spotting process: Contact blue pattern decryption ARTICULO \| Journal of Manufacturing Processes. Vol. 58. Pp. 1285-1296, Year: 2020 \| ISBN/ISSN: 1526-6125 Author: ZABALA EGUREN, ALAITZ LLAVORI OSA, IÑIGO SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MENDIGUREN OLAETA, JOSEBA
A simple device to measure bend limit of sheet metals ARTICULO \| IOP Conference Series: Materials Science and Engineering. Vol. 967. N. artículo 012058, Year: 2020 \| ISBN/ISSN: 1757-8981 Author: DEOLE, ADITYA D. MENDIGUREN OLAETA, JOSEBA ETXEBERRIA, N. ILINICH, ANDREY M. WEISS, MATTHIAS
A microstructural based constitutive approach for simulating hot deformation of Ti6Al4V alloy in the α+ß phase region ARTICULO \| Materials Science and Engineering: A. Vol. 748. Pp. 30-37. 4 March, Year: 2019 \| ISBN/ISSN: 09215093 Author: SOUZA, PAUL M. ROLFE, BERNARD HODGSON, PETER D. BELADI, HOSSEIN CHAO, QI MENDIGUREN OLAETA, JOSEBA
Numerical prediction of force and energy consumption in roll forming processes COMUNICACION_CONGRESO \| AIP Conference Proceedings. Vol. 2113. Nº 1. Proceeedings of the 22nd International ESAFORM Conference on Material forming (ESAFORM 2019). Editor, Lander Galdos et al. Published 2 July, Year: 2019 \| ISBN/ISSN: 9780735418479 Author: SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO ARMENDARIZ, ALAIN MENDIGUREN OLAETA, JOSEBA OTEGI MARTINEZ, NAGORE TRINIDAD NARANJO, JAVIER
Numerical study on the effect of microstructure on the mechanical behaviour of dual-phase steels COMUNICACION_CONGRESO \| AIP Conference Proceedings. Vol. 2113. Nº 1. Proceeedings of the 22nd International ESAFORM Conference on Material forming (ESAFORM 2019). Editor, Lander Galdos et al. Published 2 July, Year: 2019 \| ISBN/ISSN: 9780735418479 Author: MANGAS, ÁNGELA MENDIGUREN OLAETA, JOSEBA EZKERRA, JON EGUIA IBARZABAL, IÑAKI ARECHABALETA, ZALOA
Hotzetako forjan erabilitako altzairuaren gogortzearen karakterizazioa konpresio eta tortsio saiakuntzak erabilita COMUNICACION_CONGRESO \| Materialen Zientzia eta Teknologia IV. Kongresuko lanen bilduma. Donostia, 2018ko Uztailak 2-3. Argitaratzaile nagusia: Amaia Iza-Mendia. Servicio de Publicaciones Universidad de Navarra, Year: 2018 \| ISBN/ISSN: 9788480816083 Author: GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA OTEGI MARTÍNEZ, NAGORE SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO ZUBIA, BIOTZA AGIRRE BIKUÑA, JULEN
On the accurate characterization of the drawbead up-lift forces COMUNICACION_CONGRESO \| IOP Conference Series: Materials Science and Engineering. Vol. 418. Nº 1. Institute of Physics Publishing. 21 September, Year: 2018 \| ISBN/ISSN: 17578981 Author: GIL ACEDO, IMANOL GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO OTEGI MARTINEZ, NAGORE MENDIGUREN OLAETA, JOSEBA
Study on the influence of the springback on the hole expansion ratio characterization ARTICULO \| Materials Science: Materials Review. Vol. 1. Nº. 1. Whioce Publishing, Year: 2018 \| ISBN/ISSN: 25297791 Author: ZUBIA, BIOTZA AGIRRE BIKUÑA, JULEN MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
On the plastic flow rule formulation in anisotropic yielding aluminium alloys ARTICULO \| The International Journal of Advanced Manufacturing Technology. Vol. 99. Nº 1–4. Pp 255–274. Springer. October, Year: 2018 \| ISBN/ISSN: Print 02683768 Author: MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Hardening prediction of diverse materials using the Digital Image Correlation technique ARTICULO \| Mechanics of Materials. Vol. 124. Pp. 71-79. September, Year: 2018 \| ISBN/ISSN: 01676636 Author: AGIRRE BIKUÑA, JULEN SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA
Press hardening of alternative materials: conventional high-strength steels ARTICULO \| International Journal of Material Forming. Vol. 11. Nº. 5. Pp 663–670. September, Year: 2018 \| ISBN/ISSN: 19606206 Author: MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER HERRERO DORCA, NURIA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Drawbead uplift force analytical model for deep drawing operations ARTICULO \| Journal of Physics: Conference Series. Vol. 1063. Nº 1. 6 August, Year: 2018 \| ISBN/ISSN: 17426588 Author: GIL ACEDO, IMANOL SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO OTEGI MARTINEZ, NAGORE MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER
Numerical simulation of the roll levelling of third generation fortiform 1050 steel using a nonlinear combined hardening material model ARTICULO \| Journal of Physics: Conference Series. Vol. 896. N. artículo 012122. 27 September, Year: 2017 \| ISBN/ISSN: 17426588 Author: GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA SILVESTRE SORIANO, ELENA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Numerical simulation of U-Drawing test of Fortiform 1050 steel using different material models ARTICULO \| Procedia Engineering. Vol. 207. Pp. 37-142, Noviembre, Year: 2017 \| ISBN/ISSN: 18777058 Author: GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MENDIGUREN OLAETA, JOSEBA MUGARRA FERNANDEZ, ENDIKA GIL ACEDO, IMANOL ULIBARRI HERNANDEZ, UNAI
Characterization of Ti64 forging friction factor using ceramic coatings and different contact conditions COMUNICACION_CONGRESO \| Procedia Engineering. Vol. 207. Pp. 2239-2244. Noviembre, Year: 2017 \| ISBN/ISSN: 18777058 Author: GALDOS ERRASTI, LANDER AGIRRE BIKUÑA, JULEN MENDIGUREN OLAETA, JOSEBA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO SETHY, RITANJALI
U-drawing of Fortiform 1050 third generation steels. Numerical and experimental results ARTICULO \| Journal of Physics: Conference Series. Vol. 896. N. artículo 012118. 27 September, Year: 2017 \| ISBN/ISSN: 17426588 Author: SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GALDOS ERRASTI, LANDER OTERO GORROCHATEGUI, IRUNE MUGARRA FERNANDEZ, ENDIKA MENDIGUREN OLAETA, JOSEBA
Friction and heat transfer coefficient determination of titanium alloys during hot forging conditions ARTICULO \| Advanced Engineering Materials. Vol. 19. Nº 6. June, Year: 2017 \| ISBN/ISSN: 15272648 Author: SETHY, RITANJALI GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Evolution of elastic modulus in roll forming ARTICULO \| International Journal of Material Forming. Vol. 10. Nº. 3. Pp. 463–471. Springer. June, Year: 2017 \| ISBN/ISSN: 19606206 Author: ABVABI, AKBAR MENDIGUREN OLAETA, JOSEBA KUPKE, A. ROLFE, BERNARD WEISS, MATTHIAS
Cost Efficiency of the Non-Associative Flow Rule Simulation of an Industrial Component COMUNICACION_CONGRESO \| AIP Conference Proceedings. Vol. 1896. Nº 1. (Proceedings of the 20th International Conference on Material Forming (ESAFORM), Year: 2017 \| ISBN/ISSN: 9780735415805 Author: GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Hole expansion test of third generation steels COMUNICACION_CONGRESO \| AIP Conference Proceedings. Vol. 1896. Nº 1. Proceedings of the 20th International ESAFORM Conference on Material Forming (ESAFORM). Dublin. 26-28 April. Edited by Dermot Brabazon, Sumsun Naher, and Inam Ul Ahad. AIP Publishing, Year: 2017 \| ISBN/ISSN: 9780735415805 Author: AGIRRE BIKUÑA, JULEN MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
An analytical model for web-warping in variable width flexible ARTICULO \| The International Journal of Advanced Manufacturing Technology. Vol. 86. Nº5. Pp 1541–1555. September, Year: 2016 \| ISBN/ISSN: 02683768 Author: JIAO, JINGSI MENDIGUREN OLAETA, JOSEBA WEISS, MATTHIAS ROLFE, BERNARD
Press hardening of alternative high strength aluminium and ultra-high strength steels COMUNICACION_CONGRESO \| AIP Conference Proceedings. Vol. 1769. 050006, Year: 2016 \| ISBN/ISSN: 0094243X Author: MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER ORTUBAY IBABE, RAFAEL AGIRRETXE ARTEAGA, XABIER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Influence of the pressure dependent coefficient of friction on deep drawing springback predictions ARTICULO \| Tribology International. Vol. 103. Pp. 266–273. November, Year: 2016 \| ISBN/ISSN: 0301679X Author: GIL ACEDO, IMANOL SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MUGARRA FERNÁNDEZ, ENDIKA MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER
Investigation of Influencing Factors on Friction during Ring Test in Hot Forging Using FEM Simulation COMUNICACION_CONGRESO \| AIP Conference Proceedings. Vol. 1769.130009, Year: 2016 \| ISBN/ISSN: 0094243X Author: SETHY, RITANJALI SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA
Comparison between different measuring methods to determine the Young's modulus of Inconel 718 COMUNICACION_CONGRESO \| 9th Forming Technology Forum. Advanced Methods in Material Testing for Sheet Metal Forming. Ohlstadt/Garmisch-Partenkirchen. 12–13 September, Year: 2016 Author: ULIBARRI HERNANDEZ, UNAI MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GIL ACEDO, IMANOL
Influence Of Material´s Hardening Behaviour of DP1000 on Numerical Springback Prediction COMUNICACION_CONGRESO \| AIP Conference Proceedings. Vol. 1769.200014, Year: 2016 \| ISBN/ISSN: 0094243X Author: GIL ACEDO, IMANOL GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MENDIGUREN OLAETA, JOSEBA SILVESTRE SORIANO, ELENA HUG, ERIC
Friction characterisation in levelling processes ARTICULO \| Advances in Materials and Processing Technologies. Vol. 2. Nº4, Year: 2016 \| ISBN/ISSN: 2374068X Author: ULIBARRI HERNANDEZ, UNAI GIL ACEDO, IMANOL GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO SILVESTRE SORIANO, ELENA MENDIGUREN OLAETA, JOSEBA
Friction behaviour analysis of UHSS using different tool temperatures and contact pressures COMUNICACION_CONGRESO \| 9th Forming Technology Forum. Advanced Methods in Material Testing for Sheet Metal Forming. Ohlstadt/Garmisch-Partenkirchen. 12–13 September, Year: 2016 Author: GIL ACEDO, IMANOL GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MUGARRA FERNANDEZ, ENDIKA
Hot stamping of AA7075 aluminum sheets COMUNICACION_CONGRESO \| Annual Conference of the International Deep Drawing Research Group (IDDRG 2016): Challenges in Forming High-Strength Sheets. Proceedings of a meeting held 12-15 June 2016, Linz, Austria. IOP Conference Series: Materials Science and Engineering Vol. 159. Pp. 240-244. Institute of Physics Publishing (IOP), Year: 2016 \| ISBN/ISSN: 9781510833814 Author: MENDIGUREN OLAETA, JOSEBA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GALDOS ERRASTI, LANDER
Identification of friction coefficient in forging processes by means TShape tests in high temperature ARTICULO \| Key Engineering Materials. Vol. 716. Pp. 165-175, Year: 2016 \| ISBN/ISSN: 10139826 Author: SETHY, RITANJALI SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER
Sensitivity analysis on an AC600 aluminum skin component ARTICULO \| Journal of Physics: Conference Series. Vol. 734. N. artículo 032035, Year: 2016 \| ISBN/ISSN: 17426588 Author: MENDIGUREN OLAETA, JOSEBA MUGARRA FERNANDEZ, ENDIKA GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Roll levelling semi-analytical model for process optimization COMUNICACION_CONGRESO \| Journal of Physics: Conference Series. Vol. 734. N. artículo 032034, Year: 2016 \| ISBN/ISSN: 17426588 Author: SILVESTRE SORIANO, ELENA GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MENDIGUREN OLAETA, JOSEBA GARCÍA, D.
Energy Efficient Servo Controlled Roll Levelling Machines ARTICULO \| Key Engineering Materials. Vol. 716. Pp. 413-419, Year: 2016 \| ISBN/ISSN: 10139826 Author: SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GALDOS ERRASTI, LANDER SILVESTRE SORIANO, ELENA MENDIGUREN OLAETA, JOSEBA GARCÍA, DANIEL
Experimental characterization of the heat transfer coefficient under different close loop controlled pressures and die temperatures ARTICULO \| Applied Thermal Engineering. Vol. 99. Pp. 813–824, Year: 2016 \| ISBN/ISSN: 13594311 Author: MENDIGUREN OLAETA, JOSEBA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO ORTUBAY IBABE, RAFAEL GALDOS ERRASTI, LANDER
Influence of the tool temperature increment on the coefficient of friction behavior on the deep drawing process of HSS COMUNICACION_CONGRESO \| Annual Conference of the International Deep Drawing Research Group (IDDRG 2016): Challenges in Forming High-Strength Sheets. Proceedings of a meeting held 12-15 June 2016, Linz, Austria. IOP Conference Series: Materials Science and Engineering Vol. 159. Pp. 172-177. Institute of Physics Publishing (IOP), Year: 2016 \| ISBN/ISSN: 9781510833814 Author: GIL ACEDO, IMANOL GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA MUGARRA FERNANDEZ, ENDIKA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Influence of material and tribological modelling on the prediction of big size automotive components springback ARTICULO \| Key Engineering Materials. Vol. 716. Pp. 713-718, Year: 2016 \| ISBN/ISSN: 10139826 Author: GIL ACEDO, IMANOL SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GALDOS ERRASTI, LANDER MUGARRA FERNANDEZ, ENDIKA AGIRRE BIKUÑA, JULEN MENDIGUREN OLAETA, JOSEBA
Caracterización del coeficiente de fricción en procesos de aplanado COMUNICACION_CONGRESO \| XIV Congreso Nacional de Materiales. Gijón. 8-10 junio, Year: 2016 Author: ULIBARRI HERNANDEZ, UNAI SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GALDOS ERRASTI, LANDER GIL ACEDO, IMANOL SILVESTRE SORIANO, ELENA MENDIGUREN OLAETA, JOSEBA
Room temperature forming of AA7075 aluminum alloys : W-temper process ARTICULO \| Key Engineering Materials. Vols 651-653 Pp. 199-204, Year: 2015 \| ISBN/ISSN: 16629795 Author: SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GALDOS ERRASTI, LANDER AGIRRETXE ARTEAGA, XABIER MENDIGUREN OLAETA, JOSEBA ORTUBAY IBABE, RAFAEL
Effects of Microstructure on the Variation of the Unloading Behavior of DP780 Steels ARTICULO \| Journal of Materials Engineering and Performance. In press 29 August, Year: 2015 \| ISBN/ISSN: 10599495 Author: PAVLINA, E. J. MENDIGUREN OLAETA, JOSEBA WEISS, MATTHIAS ROLFE, B.F
Comparison of the hardening behaviour of different steel families : from mild and stainless steel to advanced high strength steels ARTICULO \| International Journal of Mechanical Sciences. Vol. 101–102. Pp. 10–20. October, Year: 2015 \| ISBN/ISSN: 00207403 Author: SILVESTRE SORIANO, ELENA MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER SÁENZ DE ARGANDOÑA FERNÁNDEZ DE GOROSTIZA, ENEKO
Improvement of accuracy in a free bending test for material characterization ARTICULO \| International Journal of Mechanical Sciences. Vol. 103. Pp. 288–296. November, Year: 2015 \| ISBN/ISSN: 00207403 Author: MENDIGUREN OLAETA, JOSEBA ROLFE, BERNARD ABVABI, AKBAR WEISS, MATTHIAS
Elastic behaviour characterisation of TRIP 700 steel by means of loading-unloading tests ARTICULO \| Materials Science & Engineering A. Vol. 634. Pp. 147–152. 14 May, Year: 2015 \| ISBN/ISSN: 09215093 Author: MENDIGUREN OLAETA, JOSEBA GOMEZ RODRIGUEZ, XABIER GALDOS ERRASTI, LANDER CORTÉS, FERNANDO
An analytical approach to predict web-warping and longitudinal strain in flexible roll formed sections of variable width ARTICULO \| International Journal of Mechanical Sciences. Vol. 90. Pp. 228-238. January, Year: 2015 \| ISBN/ISSN: 00207403 Author: JIAO, JINGSI MENDIGUREN OLAETA, JOSEBA WEISS, MATTHIAS ROLFE, BERNARD
Improvement in Hot Stamping Efficiency Through Tooling Optimization COMUNICACION_CONGRESO \| Hot Sheet Metal Forming of High-Performance Steel CHS2. Proceedings of the 5th International Conference on Hot Sheet Metal forming of High-Performance Steel. Pp. 639-647. Collection: CHS2-Series. Nº. 5, Year: 2015 Author: AGIRRETXE ARTEAGA, XABIER CASELLAS, D. GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA MARTIN, J. M. CARRANZA, M. RIERA, D.
Tailor tempering and hot-spotting of press hardened boron steels ARTICULO \| Key Engineering Materials. Vols 651-653. Pp 789-795, Year: 2015 \| ISBN/ISSN: 16629795 Author: GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MARTÍN, JOSÉ MIGUEL MENDIGUREN OLAETA, JOSEBA ORTUBAY IBABE, RAFAEL HERRERO DORCA, NURIA AGIRRETXE ARTEAGA, XABIER
Comparison of three methods for material hardening parameter identification under cyclic tension-compression loadings : roll leveling case study ARTICULO \| Key Engineering Materials. Vols 651-653. Pp 957-962, Year: 2015 \| ISBN/ISSN: 16629795 Author: SILVESTRE SORIANO, ELENA GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Determination of Heat Transfer Coefficients for different initial tool temperatures and closed loop controlled constant contact pressures ARTICULO \| Key Engineering Materials. Vols 651-653. Pp 1537-1542, Year: 2015 \| ISBN/ISSN: 16629795 Author: MENDIGUREN OLAETA, JOSEBA AGIRRETXE ARTEAGA, XABIER ORTUBAY IBABE, RAFAEL MARTÍN, JOSÉ MIGUEL GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
On the definition of an kinematic hardening effect graph for sheet metal forming process simulations ARTICULO \| International Journal of Mechanical Sciences. Vol. 92. Pp. 109–120. March, Year: 2015 \| ISBN/ISSN: 00207403 Author: MENDIGUREN OLAETA, JOSEBA ROLFE, BERNARD WEISS, MATTHIAS
Friction Characterization in Levelling Processes COMUNICACION_CONGRESO \| Advances in Materials & Processing Technologies (AMPT). Madrid. 14-17 December, Year: 2015 Author: ULIBARRI HERNANDEZ, UNAI SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MENDIGUREN OLAETA, JOSEBA GIL ACEDO, IMANOL GALDOS ERRASTI, LANDER
Friction and Heat Transfer Coefficient Determination of Titanium Alloys during Hot Forging Conditions COMUNICACION_CONGRESO \| Advances in Materials and Processing Technologies Conference (AMPT). 14-17 Diciembre, Year: 2015 Author: SETHY, RITANJALI SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA
Influence of material´s hardening behaviour of DP1000 on numerical springback prediction COMUNICACION_CONGRESO \| Advances in Materials & Processing Technologies (AMPT). Madrid. 14-17 December, Year: 2015 Author: GIL ACEDO, IMANOL ULIBARRI HERNANDEZ, UNAI MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Influencia de la implementación de un coeficiente de fricción variable en el proceso de embutición COMUNICACION_CONGRESO \| Proceedings of the CMN 2015. Congress on Numerical Methods in Engineering. Lisbon. 29 June- 2 July, Year: 2015 Author: GIL ACEDO, IMANOL GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Springback investigation in roll forming of a V-section ARTICULO \| Applied Mechanics and Materials. Vol. 553. Pp. 643-648. May, Year: 2014 \| ISBN/ISSN: 16627482 Author: ABVABI, AKBAR MENDIGUREN OLAETA, JOSEBA ROLFE, BERNARD WEISS, MATTHIAS
Analysis of plastic behavior under cyclic loadings of advanced materials COMUNICACION_CONGRESO \| Innovations for the sheet metal industry, IDDRG, Conference Proceedings. Paris. June 1-4. Pp. 114-119. Éditions Lavoisier, Year: 2014 Author: SILVESTRE SORIANO, ELENA GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MENDIGUREN OLAETA, JOSEBA
Influence of material's hardening law in the simulation of DP1000 deep drawing and subsequent springback COMUNICACION_CONGRESO \| Innovations for the sheet metal industry, IDDRG, Conference Proceedings. Paris. June 1-4. Pp. 147-152. Éditions Lavoisier, Year: 2014 Author: GIL ACEDO, IMANOL SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GALDOS ERRASTI, LANDER SILVESTRE SORIANO, ELENA MENDIGUREN OLAETA, JOSEBA ORTUBAY IBABE, RAFAEL ULIBARRI HERNÁNDEZ, UNAI
Simulation of springback and microstructure analysis of dual phase steels COMUNICACION_CONGRESO \| AIP Conference Proceedings. Vol. 1567. (NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes: Part A Benchmark Problems and Results and Part B General Papers. P. 713, Year: 2014 \| ISBN/ISSN: 9780735411951 Author: SRI, T. K. ROLFE, BERNARD WEI, X. MENDIGUREN OLAETA, JOSEBA
The effect of tooling design parameters on web-warping in the flexible roll forming of UHSS COMUNICACION_CONGRESO \| AIP Conference Proceedings. Volume 1567 (Numisheet. Melbourne, Australia. 6 - 10 January, 2014). Nº 1. Pp. 892-895, Year: 2014 \| ISBN/ISSN: Print 0094243X Author: JIAO, JINGSI WEISS, MATTHIAS GALDOS ERRASTI, LANDER ROLFE, BERNARD MENDIGUREN OLAETA, JOSEBA
Characterization of a dual phase steel using tensile and free bending tests COMUNICACION_CONGRESO \| AIP Conference Proceedings. Vol. 1567 (NUMISHEET 2014: The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes: Part A Benchmark Problems and Results and Part B General Papers) P. 659, Year: 2014 \| ISBN/ISSN: Print 0094243X Author: MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER HANSELMAN, DUANE ATZEMA, E. ROLFE, BERNARD HODGSON, PETER WEISS, MATTHIAS
Strain path's influence on the elastic behaviour of the TRIP 700 steel ARTICULO \| Materials Science and Engineering: A. Vol 560. Pp. 433-438, 10 January Year: 2013 \| ISBN/ISSN: 09215093 Author: MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER BELLVEILLER, S CORTÉS, FERNANDO
The effect of process parameters on web-warping in the flexible roll forming of UHSS COMUNICACION_CONGRESO \| TTP 2013: Proceedings of the 2013 Tools and Technologies for Processing Ultra High Strength Materials conference. Graz, Austria. 19-20 September. Pp. 1-10, Year: 2013 Author: JIAO, JINGSI GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA ROLFE, BERNARD WEISS, MATTHIAS
An extended elastic law to represent non-linear elastic behaviour ARTICULO \| International Journal of Mechanical Sciences. Vol. 77. Pp.57–64. December, Year: 2013 \| ISBN/ISSN: 00207403 Author: MENDIGUREN OLAETA, JOSEBA CORTÉS MARTÍNEZ, FERNANDO GALDOS ERRASTI, LANDER TRUJILLO, JUAN J.
Simulation of springback and microstructural analysis of dual phase steels COMUNICACION_CONGRESO \| AIP Conference Proceedings. Vol. 1567. N. 1. Pp. 713-716, Year: 2013 \| ISBN/ISSN: 9780735411951 Author: KALYAN, T. SRI. WEI, X. ROLFE, BERNARD MENDIGUREN OLAETA, JOSEBA
Influencia del modelo de endurecimiento de material en la simulación de un proceso de aplanado por rodillos COMUNICACION_CONGRESO \| Congreso de Métodos Numéricos en Ingeniería. Bilbao. 25-28 junio, Year: 2013 Author: SILVESTRE SORIANO, ELENA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GARCÍA, D. MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER
Influence of the number of tensile/compression cycles on the fitting of a mixed hardening material model: roll levelling process case study ARTICULO \| Key Engineering Materials. Vol. 554-557. Pp. 2375-2387, June Year: 2013 \| ISBN/ISSN: 10139826 Author: SILVESTRE SORIANO, ELENA GALDOS ERRASTI, LANDER SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO MENDIGUREN OLAETA, JOSEBA
Influence of number of backstresses on the mixed hardening chaboche-lemaitre model for modelling roll levelling processes COMUNICACION_CONGRESO \| IDDRG 2013 : Proceedings of the International Deep-Drawing Research Group. Conference International Deep Drawing Research Group Conference (IDDRG). Zurich. 2-5 June, Year: 2013 \| ISBN/ISSN: 9783906031347 Author: SILVESTRE SORIANO, ELENA MENDIGUREN OLAETA, JOSEBA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GALDOS ERRASTI, LANDER
A generalised fractional derivative model to represent elastoplastic behaviour of metals ARTICULO \| International Journal of Mechanical Sciences. Vol. 65. Nº 1. PP. 12–17, December Year: 2012 \| ISBN/ISSN: 00207403 Author: MENDIGUREN OLAETA, JOSEBA CORTÉS MARTÍNEZ, FERNANDO GALDOS ERRASTI, LANDER
Influence of material's yield strength on the kinematic hardening of steels COMUNICACION_CONGRESO \| Steel Research International. Special Issue. Pp. 967-970. Wiley, Year: 2012 \| ISBN/ISSN: 9783514007970 Author: MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER SILVESTRE SORIANO, ELENA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO
Roll levelling numerical simulation using a nonlinear mixed hardening material model COMUNICACION_CONGRESO \| Steel Research International. Special Issue. Pp. 1295-1298. Wiley, Year: 2012 \| ISBN/ISSN: 9783514007970 Author: SILVESTRE SORIANO, ELENA SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO GALDOS ERRASTI, LANDER MENDIGUREN OLAETA, JOSEBA
Modelización del Comportamiento Plástico de Metales mediante Ecuaciones Constitutivas Fraccionarias LIBRO_CAPITULO \| Congreso de Metodos numericos en Ingenieria . Barcelona. 29 de Junio-2 de julio. Metodos Numericos en Ingenieria 2009. Antonio Huerta et al. [Barcelona] : SEMNI, Year: 2009 \| ISBN/ISSN: 9788496736665 Author: MENDIGUREN OLAETA, JOSEBA GALDOS ERRASTI, LANDER CORTÉS MARTÍNEZ, FERNANDO

Análisis y modelización de los fenómenos mecánicos y microestructurales fundamentales subyacentes en el proceso de fundición y forja para la aleación Alloy28 COMPETITIVO Start Date: 2018-04-01 \| End Date: 2019-03-31 Financing: Gobierno Vasco Participation: MONDRAGON GOI ESKOLA POLITEKNIKOA JOSE Mª ARIZMENDIARRIETA, S. COOP.;TUBACEX INNOVACION, S.L. Author: Hurtado HURTADO, Iñaki (INVEST) Mendiguren Olaeta, Joseba (INVEST) GALDOS ERRASTI, LANDER (INVEST) GANDARIAS INCHAUSTI, KEPA (INVEST) URRUTIBEASCOA IRALA, IDOIA (INVEST) ORUNA OTALORA, ZIGOR ALBERTO (INVEST) SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO (INVEST)
Desarrollo de modelos numéricos avanzados para la estampación de componentes metálicos multifásicos para el vehículo ligerado COMPETITIVO Start Date: 2018-03-01 \| End Date: 2019-12-31 Financing: Gobierno Vasco Participation: FUNDACIÓN CIE I+D+I;FUNDACIÓN TECNALIA RESEARCH & INNOVATION;MONDRAGON GOI ESKOLA POLITEKNIKOA JOSE Mª ARIZMENDIARRIETA, S. COOP. Author: Otegi MARTINEZ, Nagore (INVEST) ORTUBAY IBABE, RAFAEL (INVEST) Mendiguren Olaeta, Joseba (INVEST) SUQUIA IMAZ, AITOR (INVEST) GALDOS ERRASTI, LANDER (INVEST) SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO (INVEST)
Desarrollo de distintos métodos de alivio de tensiones residuales en chapas metálicas (2ª parte) COMPETITIVO Start Date: 2018-02-23 \| End Date: 2018-12-31 Financing: Gobierno Vasco Participation: IDEKO, S.COOP.;KONIKER, S. COOP;MONDRAGON GOI ESKOLA POLITEKNIKOA JOSE Mª ARIZMENDIARRIETA, S. COOP. Author: ITURRASPE LARREATEGUI, MARIA AINHOA (INVEST) Mendiguren Olaeta, Joseba (INVEST) GALDOS ERRASTI, LANDER (INVEST) SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO (INVEST)
Desarrollo de nueva Línea de Corte Transversal de gran anchura para Aluminios de alta resistencia para sector Aeronáutico y Automóvil CONTRATO Start Date: 2018-02-15 \| End Date: 2018-12-31 Financing: Gobierno Vasco Participation: FAGOR ARRASATE, S.COOP. Author: Otegi MARTINEZ, Nagore (INVEST) ITURRASPE LARREATEGUI, MARIA AINHOA (INVEST) ORTUBAY IBABE, RAFAEL (INVEST) Mendiguren Olaeta, Joseba (INVEST) SUQUIA IMAZ, AITOR (INVEST) GALDOS ERRASTI, LANDER (INVEST_PRINCIPAL) ORUNA OTALORA, ZIGOR ALBERTO (INVEST) SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO (INVEST)
Automobilgintzarako, berotan estanpatutako duroaluminiozko osagaiak ekoizteko instalakuntzaren definizioa CONTRATO Start Date: 2018-02-15 \| End Date: 2018-12-31 Financing: Gobierno Vasco Participation: FAGOR ARRASATE, S.COOP. Author: Otegi MARTINEZ, Nagore (INVEST) Hurtado HURTADO, Iñaki (INVEST) ORTUBAY IBABE, RAFAEL (INVEST) Mendiguren Olaeta, Joseba (INVEST) SUQUIA IMAZ, AITOR (INVEST) GALDOS ERRASTI, LANDER (INVEST_PRINCIPAL) SAENZ DE ARGANDOÑA FERNANDEZ DE GOROSTIZA, ENEKO (INVEST)
Coil to coil material properties variation study using the bend test set-up CONTRATO Start Date: 2013-03-12 \| End Date: 2014-02-08 Financing: Ford Motr Company of Australia Participation: Australian Rollforming Manufacturers Author: Mendiguren Olaeta, Joseba (INVEST)
Flexible Roll Forming of a component section from AHSS COMPETITIVO Start Date: 2013-03-07 \| End Date: 2013-12-31 Financing: AutoCRC Participation: Deakin University Author: Mendiguren Olaeta, Joseba ()

Thesis made

Experimental and numerical analysis of the elastic behaviour of the TRIP 700 steel for springback predictions Reading date: 2012-12-07 Director: Lander Galdos-Fernando Cortés Author: Mendiguren Olaeta, Joseba

Directed thesis

Applicability of a Dynamic Recrystallization Model for an Open Die Forging Process for the As-Cast Superaustenitic Stainless Steel Alloy 28 Reading date: 2022-04-12 Author: Mora Serrano, Elena Director: Mendiguren Olaeta, Joseba
Numerical simulation development of thermomechanical processes at very high temperatures. Reading date: Author: Sajjad, Muhammad Director: Mendiguren Olaeta, Joseba
Improvement of titanium forging for biomedical applications using advanced finite element models Reading date: Author: Sethy , Ritanjali Director: Mendiguren Olaeta, Joseba
Influencia y análisis del coeficiente de fricción en procesos de conformado de chapa Reading date: Author: Ulibarri Hernandez, Unai Director: Mendiguren Olaeta, Joseba
Digital-Twin of the Easy-Open-End for the manufacture and opening prediction Reading date: Author: Cereza Bengoetxea, Eneritz Director: Otegi MARTINEZ, Nagore Mendiguren Olaeta, Joseba

SyNC - Sostenibilidad y Negocios Circulares
Business Data Analytics

BROWSE PROJECTS