Zer egiten dugu
ORTIZ DE ZARATE BENGOA, GORKA
Dagokion taldea: Errendimendu handiko mekanizazioa
Izen abizenak: GORKA ORTIZ DE ZARATE BENGOA
Herritartasuna:
Harremanetarako Telefonoa: 943794700
Kontaktatu
Formakuntza
Lizentziatua, Ingeniaria, Gradua, Arkitektoa
- Mekanikako Ingeniaritza, Mondragon Unibertsitatea, 2015
Graduondoa
- Industria ingenieritza, Mondragon Unibertsitatea, 2017
Egungo lan egoera
- Erakundea: Mondragon Unibertsitatea
- Zentroa: Goi Eskola Politeknikoa
- Departamentua: Mekanika eta Ekoizpen Industriala
- Ezagutza arloa: Ingeniería de los procesos de fabricación
- Kontratazio mota: Contratado
- Maila/Lanpostua: Doktoregaia
- Ikerketa taldea: Errendimendu handiko mekanizazioa
Txostenak kongresuetan/Konferentziak
Towards inverse simulation: Effect of material parameters on machining predictions AIP Conference Proceedings. Vol. 2113. Nº 1. Proceeedings of the 22nd International ESAFORM Conference on Material forming (ESAFORM 2019). Editor, Lander Galdos et al. Published 2 July, Urtea: 2019 Egileak: A. Sela, G. Ortiz-de-Zarate, D. Soriano, M. Cuesta, I. Arrieta, P. J. Arrazola |
Influence of chip segmentation of Ti64 on the topography of the machined surface AIP Conference Proceedings 2113 (Proceedings of the 22nd International ESAFORM Conference on Material Forming). Published Online: 02 July, Urtea: 2019 Egileak: G. Ortiz-de-Zarate, A. Sela, D. Soriano, D. Soler, P. Aristimuño, and P. J. Arrazola |
Hizkuntzen ezagutza
- Ingelesa (C1)
Combining experimental and FEM approaches to determine the influence of workpiece temperature on fundamental variables in the machining process COMUNICACION_CONGRESO | Materials Research Proceedings. Vol. 41. Pp. 1972-1981, Urtea: 2024 | ISBN/ISSN: 2474-3941 Egilea: ORTIZ DE ZARATE BENGOA, GORKA ORUNA TENA, AINARA SORIANO MORENO, DENIS ARRIETA GALDOS, IÑAKI MIRENA ARRAZOLA ARRIOLA, PEDRO JOSE SOLER MALLOL, DANIEL |
Force Prediction Methodology for Complex Shape Broaching COMUNICACION_CONGRESO | Procedia CIRP. Vol 117. Pp. 50-55, Urtea: 2023 | ISBN/ISSN: 2212-8271 online Egilea: ORTIZ DE ZARATE BENGOA, GORKA SORIANO MORENO, DENIS ARRAZOLA ARRIOLA, PEDRO JOSE MADARIAGA ZABALA, AITOR SOLER MALLOL, DANIEL |
Adiabatic self-heating determination for Ti6Al4V at different temperatures ARTICULO | International Journal of Heat and Mass Transfer. V. 204. N. articulo 123747 Urtea: 2023 | ISBN/ISSN: 1879-2189 Egilea: SELA BARRIAL, ANDRES ARRAZOLA ARRIOLA, PEDRO JOSE GALLEGOS, L. GERMAIN, GUÉNAËL SOLER MALLOL, DANIEL ORTIZ DE ZARATE BENGOA, GORKA |
Effect of Tool Geometry and LCO2 Cooling on Cutting Forces and Delamination when Drilling CFRP Composites Using PCD Tools COMUNICACION_CONGRESO | Procedia CIRP. Vol. 108. Issue C. Pp. 752-757, Urtea: 2022 | ISBN/ISSN: 2212-8271 Egilea: RODRIGUEZ BOGAJO, IÑIGO SORIANO MORENO, DENIS ARRAZOLA ARRIOLA, PEDRO JOSE PUŠAVEC, F. CUESTA ZABALJAUREGUI, MIKEL ORTIZ DE ZARATE BENGOA, GORKA |
Enhancing surface integrity of A7050-T7451 aluminium alloy by pneumatic machine hammer peening COMUNICACION_CONGRESO | Procedia CIRP. Vol. 108. Pp. 317-322, Urtea: 2022 | ISBN/ISSN: 2212-8271 Egilea: MADARIAGA ZABALA, AITOR CUESTA ZABALJAUREGUI, MIKEL ARRAZOLA ARRIOLA, PEDRO JOSE ORTIZ DE ZARATE BENGOA, GORKA GARAY ARAICO, AINARA DOMINGUEZ ROMERO, ERIKA |
Surface topography irregularities generated by broaching ARTICULO | CIRP Annals. Vol. 71, No. 1, p. 105-108, Urtea: 2022 | ISBN/ISSN: 1726-0604 online Egilea: ORTIZ DE ZARATE BENGOA, GORKA ARRAZOLA ARRIOLA, PEDRO JOSE MADARIAGA ZABALA, AITOR CHILDS, THOMAS H.C. |
Inverse Identification of the Ductile Failure Law for Ti6Al4V Based on Orthogonal Cutting Experimental Outcomes ARTICULO | Metals. Vol. 11. N. 8. N. artículo 1154, Urtea: 2021 | ISBN/ISSN: 2075-4701 Egilea: SELA BARRIAL, ANDRES DUCOBU, FRANÇOIS ARRAZOLA ARRIOLA, PEDRO JOSE SOLER MALLOL, DANIEL ORTIZ DE ZARATE BENGOA, GORKA GERMAIN, GUÉNAËL |
Measurement of plastic strain and plastic strain rate during orthogonal cutting for Ti-6Al-4V ARTICULO | International Journal of Mechanical Sciences. Vol. 198. N. artículo 106397, Urtea: 2021 | ISBN/ISSN: 0020-7403 Egilea: SELA BARRIAL, ANDRES ARRAZOLA ARRIOLA, PEDRO JOSE GERMAIN, GUÉNAËL ARISTIMUÑO OSORO, PATXI XABIER ORTIZ DE ZARATE BENGOA, GORKA SOLER MALLOL, DANIEL |
A novel methodology to characterize tool-chip contact in metal cutting using partially restricted contact length tools ARTICULO | CIRP Annals. Vol. 70. Nº 1. Pp. 61-64, Urtea: 2021 | ISBN/ISSN: 0007-8506 Egilea: ORTIZ DE ZARATE BENGOA, GORKA ARRAZOLA ARRIOLA, PEDRO JOSE CHILDS, THOMAS H.C. MADARIAGA ZABALA, AITOR |
In-SEM micro-machining reveals the origins of the size effect in the cutting energy ARTICULO | Scientific Reports. Vol. 11. N. 1. Article 2088, Urtea: 2021 | ISBN/ISSN: 2045-2322 Egilea: MEDINA CLAVIJO, BENTEJUI CHUVILIN, ANDREY ARRAZOLA ARRIOLA, PEDRO JOSE FEDORETS, ALEKSANDR ARRIETA GALDOS, IÑAKI MIRENA SELA BARRIAL, ANDRES ORTIZ DE ZARATE BENGOA, GORKA |
Experimental and FEM analysis of dry and cryogenic turning of hardened steel 100Cr6 using CBN Wiper tools COMUNICACION_CONGRESO | Procedia CIRP. Vol. 102. Pp. 7-12, Urtea: 2021 | ISBN/ISSN: 2212-8271 Egilea: ORTIZ DE ZARATE BENGOA, GORKA MADARIAGA ZABALA, AITOR SORIANO MORENO, DENIS GARAY ARAICO, AINARA RODRIGUEZ BOGAJO, IÑIGO ARRAZOLA ARRIOLA, PEDRO JOSE |
Surface drag analysis after Ti-6Al-4V orthogonal cutting using grid distortion COMUNICACION_CONGRESO | Procedia CIRP. Vol. 87. Pp. 372-377, Urtea: 2020 | ISBN/ISSN: 2212-8271 Egilea: SELA BARRIAL, ANDRES SORIANO MORENO, DENIS ARISTIMUÑO OSORO, PATXI XABIER SOLER MALLOL, DANIEL ORTIZ DE ZARATE BENGOA, GORKA DUCOBU, FRANÇOIS GERMAIN, GUÉNAËL ARRAZOLA ARRIOLA, PEDRO JOSE |
Sensitivity analysis of the input parameters of a physical based ductile failure model of Ti-6Al-4V for the prediction of surface integrity COMUNICACION_CONGRESO | Procedia CIRP. Vol. 87. Pp. 533-538, Urtea: 2020 | ISBN/ISSN: 2212-8271 Egilea: ORTIZ DE ZARATE BENGOA, GORKA SELA BARRIAL, ANDRES CHILDS, THOMAS H.C. MADARIAGA ZABALA, AITOR ARRAZOLA ARRIOLA, PEDRO JOSE |
Towards inverse simulation: Effect of material parameters on machining predictions COMUNICACION_CONGRESO | AIP Conference Proceedings. Vol.21132. Proceedings of the 22nd International ESAFORM Conference on Material Forming. Article 080021. July, Urtea: 2019 | ISBN/ISSN: 9780735418479 Egilea: SELA BARRIAL, ANDRES CUESTA ZABALJAUREGUI, MIKEL ARRAZOLA ARRIOLA, PEDRO JOSE ARRIETA GALDOS, IÑAKI MIRENA SORIANO MORENO, DENIS ORTIZ DE ZARATE BENGOA, GORKA |
A mechanistic model to predict cutting force on orthogonal machining of Aluminum 7475-T7351 considering the edge radius COMUNICACION_CONGRESO | Procedia CIRP. Vol. 82. Pp. 32-36. Elsevier, Urtea: 2019 | ISBN/ISSN: 22128271 Egilea: SELA BARRIAL, ANDRES SORIANO MORENO, DENIS ARRIETA GALDOS, IÑAKI MIRENA ORTIZ DE ZARATE BENGOA, GORKA ARRAZOLA ARRIOLA, PEDRO JOSE MEDINA CLAVIJO, BENTEJUI ARISTIMUÑO OSORO, PATXI XABIER |
FEM modeling of hard turning 42CrMoS4 steel ARTICULO | Procedia CIRP. Vol. 82. Pp. 77-82, Urtea: 2019 | ISBN/ISSN: 22128271 Egilea: SAEZ DE BURUAGA ECHEANDIA, MIKEL MIELGO MERINO, ROBERTO ARRAZOLA ARRIOLA, PEDRO JOSE AIZPURU, OIHAN ORTIZ DE ZARATE BENGOA, GORKA SOLER MALLOL, DANIEL ARISTIMUÑO OSORO, PATXI XABIER GAINZA, L. |
Evaluation of different flow stress laws coupled with a physical based ductile failure criterion for the modelling of the chip formation process of Ti-6Al-4V under broaching conditions COMUNICACION_CONGRESO | Procedia CIRP. Vol. 82. Pp. 65-70. Available online 5 July, Urtea: 2019 | ISBN/ISSN: 22128271 Egilea: ORTIZ DE ZARATE BENGOA, GORKA DUCOBU, FRANÇOIS SOLER MALLOL, DANIEL ARRAZOLA ARRIOLA, PEDRO JOSE CHILDS, THOMAS H.C. SELA BARRIAL, ANDRES SAEZ DE BURUAGA ECHEANDIA, MIKEL |
Influence of chip segmentation of Ti64 on the topography of the machined surface COMUNICACION_CONGRESO | AIP Conference Proceedings. Vol.21132. Proceedings of the 22nd International ESAFORM Conference on Material Forming. Article 080022. July, Urtea: 2019 | ISBN/ISSN: 00001984 Egilea: ORTIZ DE ZARATE BENGOA, GORKA SOLER MALLOL, DANIEL ARRAZOLA ARRIOLA, PEDRO JOSE SORIANO MORENO, DENIS SELA BARRIAL, ANDRES ARISTIMUÑO OSORO, PATXI XABIER |
Methodology to establish a hybrid model for prediction of cutting forces and chip thickness in orthogonal cutting condition close to broaching ARTICULO | The International Journal of Advanced Manufacturing Technology. Vol. 101. Nº 5–8. Pp. 1357–1374. April, Urtea: 2019 | ISBN/ISSN: 02683768 Egilea: ORTIZ DE ZARATE BENGOA, GORKA GARAY ARAICO, AINARA SELA BARRIAL, ANDRES SAEZ DE BURUAGA ECHEANDIA, MIKEL MADARIAGA ZABALA, AITOR CUESTA ZABALJAUREGUI, MIKEL ARRAZOLA ARRIOLA, PEDRO JOSE |
Modelización por elementos finitos del torneado de aceros en estado templado = Finite element modelling of the turning of quenched steels ARTICULO | Dyna. Vol. 94. Nº 3. Pp. 331-337. Mayo, Urtea: 2019 | ISBN/ISSN: 00127361 Egilea: GAINZA ARTOLA, LEIRE ORTIZ DE ZARATE BENGOA, GORKA ARRAZOLA ARRIOLA, PEDRO JOSE SAEZ DE BURUAGA ECHEANDIA, MIKEL SOLER MALLOL, DANIEL ARISTIMUÑO OSORO, PATXI XABIER AIZPURU, OIHAN MIELGO, ROBERTO |
The statistical analysis of the resilence module COMUNICACION_CONGRESO | Conference on Public Recreation and Landscape Protection - With Man Hand in Hand. Brno, Czech Republic. 03-05 May 2005. Pp. 258-264. Brno: Mendel University, Urtea: 2015 | ISBN/ISSN: 2336-632X Egilea: ORTIZ DE ZARATE BENGOA, GORKA SEVELOVA, LENKA |
Egindako tesiak
Broaching of Udimet 720 Li: Assessment of Surface Integrity Combining Experimental and Finite Element Modelling Approaches Irakurtze data: 2021-12-17 Zuzendaria: Pedro José Arrazola y Aitor Madariaga Egilea: ORTIZ DE ZARATE BENGOA, GORKA |